Flashforge Creator 5 and Creator 5 Pro: TCT Asia debut in March 2026, $699 and $849 on Flashforge's US store on October 17, 2026
Flashforge's US store listed the Creator 5 Pro at $849 and the Creator 5 at $699 on October 17, 2026, each $100 below the store's regular prices of $949 and $799, and both were marked in stock. Flashforge's press release dated March 24, 2026 says the Creator 5 series debuted at TCT Asia 2026 in Shanghai. The store's product records were published on March 23, 2026 (Creator 5) and April 3, 2026 (Creator 5 Pro). None of the Flashforge pages we read states the date the first US orders shipped.
- Creator 5 Pro, US store (Oct. 17, 2026)
- $849 (regular price $949)
- Creator 5, US store (Oct. 17, 2026)
- $699 (regular price $799)
- Snapmaker U1, US store (Oct. 17, 2026)
- $749 (compare-at $999)
- Announced
- Creator 5 series shown at TCT Asia 2026, Shanghai; Flashforge press release dated March 24, 2026
- US store product records published
- Creator 5: March 23, 2026; Creator 5 Pro: April 3, 2026 (listing dates, not ship dates)
- Toolheads
- 4 independent toolheads (both models)
- Build volume
- 256 × 256 × 256 mm (both models)
- Nozzle
- 0.4 mm standard; 0.25, 0.6 and 0.8 mm sold separately; max 320°C
- What the Pro adds
- Enclosed frame, active chamber heating up to 65°C, HEPA13 filter plus activated carbon, door and top-cover detection
Figures above were read from Flashforge's and Snapmaker's US store product pages and product data, Flashforge's blog and a newswire copy of Flashforge's press release on 2026-10-17. See sources.
Flashforge Creator 5 Pro release date: what Flashforge has published
Flashforge has not published a single "release date" for the Creator 5 series on the pages we read. The dated records are the trade-show press release, the store's product data and two later blog posts.
| Date | Event | Source |
|---|---|---|
| March 11, 2026 | Creator 5 product record created on Flashforge's US store | flashforge.com product data (listing date only) |
| March 23, 2026 | Creator 5 product record published on the US store | flashforge.com product data (listing date only) |
| March 24, 2026 | Press release: TCT Asia 2026 has concluded in Shanghai; the Creator 5 series and the CJ270 were among Flashforge's new products | Flashforge press release, GlobeNewswire (AOL copy) |
| April 3, 2026 | Creator 5 Pro product record created and published on the US store | flashforge.com product data (listing date only) |
| July 5, 2026 | Flashforge blog post comparing the Creator 5 Pro and Creator 5, at $849 and $699 | Flashforge blog |
| July 31, 2026 | Flashforge announces 160 Creator 5 Series Early Bird winners | Flashforge blog |
| October 17, 2026 | US store: Creator 5 $699, Creator 5 Pro $849, both "In Stock" | flashforge.com |
The press release opens: "TCT Asia 2026 concluded at the National Exhibition and Convention Center in Shanghai." It describes the Creator 5 as having four independent extruders and says it "can switch colors in just seven seconds." It describes the Creator 5 Pro as adding a fully enclosed, temperature-controlled chamber. The release gives no US price or ship date.
Flashforge's July 31, 2026 post on the Creator 5 Series Early Bird promotion says "one winner was selected for every 100 eligible orders" during the launch period, with each winner receiving a Flashforge gift card worth $649 in the United States. The post does not give the dates of the promotion or the launch prices.
Flashforge Creator 5 price and Creator 5 Pro price in the US
On October 17, 2026 the US store's product data gave one variant for each printer: "Creator 5" at $699.00 with a compare-at price of $799.00, and "Creator 5 Pro" at $849.00 with a compare-at price of $949.00, both available. The product pages show the same figures as "Sale price" and "Regular price", with "Save $100.00". Flashforge's Creator 5 Series page shows both printers under "$100 OFF". None of these pages gives an end date for the $100 reduction.
Our 2026 release dates tracker read the same $699 and $849 on October 11, 2026, and Flashforge's own July 5, 2026 comparison post shows $699.00 and $849.00 next to $799.00 and $949.00.
| Item (Flashforge US store) | Price, Oct. 17, 2026 |
|---|---|
| Creator 5 | $699 (regular $799) |
| Creator 5 Pro | $849 (regular $949) |
| Nozzle Assembly for Creator 5 Series, 0.4 mm or 0.6 mm | $35.00 |
| Nozzle Assembly for Creator 5 Series, 0.25 mm or 0.8 mm | $39.90 |
| HEPA Filter for Creator 5 Pro | $14.90 |
Flashforge Creator 5 Pro vs Creator 5: the differences
Flashforge's FAQ on both product pages says the two printers share four independent toolheads, hardened-steel nozzles, automatic leveling and the same build volume. The Pro adds an enclosed build chamber, active chamber heating up to 65°C, HEPA 13 and activated-carbon filtration, auxiliary cooling, and door and top-cover detection. On whether a Creator 5 can be converted, the FAQ says the Pro's "active chamber heating system is built into the machine itself" and cannot simply be added later.
| Official spec | Creator 5 | Creator 5 Pro |
|---|---|---|
| US store price, Oct. 17, 2026 | $699 (regular $799) | $849 (regular $949) |
| Structure | Open frame design | Enclosed frame design |
| Active chamber heating | No | Yes, max 65°C |
| Air filtration | Not listed | HEPA13 filter + activated carbon |
| Door detection / auxiliary cooling fan | Not listed | Front door and top cover; auxiliary cooling fan |
| Noise as stated | Below 55 dB in silent mode | Enclosure reduces noise "from 65 dB to 55 dB" |
| Printer size without filament tube and holders | 436 × 432 × 480 mm | 441 × 411 × 460 mm |
| Printer size with filament tube and holders | 520 × 443 × 710 mm | 520 × 443 × 710 mm |
| Weight (net / gross) | 14 kg / 18 kg | 18 kg / 22 kg |
| Power | 700 W | 1200 W |
| Recommended filaments | PLA, PETG, TPU-90A, TPU-95A, TPU-64D, PLA-CF, PETG-CF, Silk, PVA, BVOH | The same, plus S-Multi, S-PAHT, ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF, ASA-GF, ABS-GF, PPA-CF, PPS-CF, HIPS |
| Shared by both | 4 independent toolheads; 256 × 256 × 256 mm build volume; max nozzle 320°C; max bed 120°C; max flow 32 mm³/s; print speed max 300 mm/s; travel speed max 600 mm/s; acceleration max 30,000 mm/s²; textured PEI flexible steel plate; 4-inch 800 × 480 touchscreen; camera 1280 × 720 at 30 fps; 2.4 GHz / 5 GHz Wi-Fi and USB; Orca-Flashforge and OrcaSlicer | |
The Creator 5's specification table also has a line "Supported Filaments with Enclosure" listing ABS, ASA and other engineering filaments, even though the Creator 5 is open-frame. Its FAQ says an owner can print or build an enclosure around a Creator 5 for passive heat retention, which Flashforge says is not the same as the Pro's actively controlled chamber heating. We found no enclosure kit among the Creator 5 Series accessories listed in the US store's sitemap.
The Pro's FAQ says its standard configuration does not include an automatic multi-spool filament feeder: "Filament must be manually loaded into each toolhead." The Creator 5 page does not address automatic loading.
Flashforge Creator 5 Pro nozzle: sizes, temperature and replacements
Both printers ship with a 0.4 mm nozzle as standard, according to the specification tables, which also list 0.25 mm, 0.6 mm and 0.8 mm. Flashforge's FAQ describes the nozzles as hardened steel and rated to 320°C. The "Nozzle Assembly for Creator 5 Series" sold on the US store comes in four variants, each labeled 320°C: 0.25 mm and 0.8 mm at $39.90, and 0.4 mm and 0.6 mm at $35.00 on October 17, 2026. The specification tables mark the nozzle as removable.
On the Creator 5's FAQ, Flashforge lists TPU-90A, TPU-95A and TPU-64D as supported and says: "TPU softer than 90A is not currently included in the official compatibility list".
Flashforge Creator 5 Pro vs Snapmaker U1: official specs side by side
All three printers use four toolheads that the printer swaps during a print. The table repeats each maker's own spec labels; speed figures are not measured the same way by each brand, and we do not test or rate print results. For the U1's price history and Top Cover ship dates, see our Snapmaker U1 US price and release record.
| Official spec | Flashforge Creator 5 Pro | Flashforge Creator 5 | Snapmaker U1 |
|---|---|---|---|
| US store price, Oct. 17, 2026 | $849 (regular $949) | $699 (regular $799) | $749 (compare-at $999) |
| Enclosure | Enclosed, active heating to 65°C | Open frame | Optional Top Cover, $149 (compare-at $249) |
| Air filtration | HEPA13 + activated carbon | Not listed | Three-stage filtration in the optional Top Cover |
| Color change time as stated | Not stated on the Pro page | Seven seconds (press release) | 5 seconds |
| Filament loading | Manual, into each toolhead | Not stated on the Creator 5 page | Auto-loading, Backup Mode, RFID for Snapmaker filaments |
| Build volume | 256 × 256 × 256 mm | 256 × 256 × 256 mm | 270 × 270 × 270 mm |
| Printer dimensions | 441 × 411 × 460 mm (520 × 443 × 710 mm with tube and holders) | 436 × 432 × 480 mm (520 × 443 × 710 mm with tube and holders) | 584 × 499 × 730 mm |
| Net weight | 18 kg | 14 kg | 18.2 kg |
| Speed as listed | Print max 300 mm/s; travel max 600 mm/s | Print max 300 mm/s; travel max 600 mm/s | Max toolhead speed 500 mm/s |
| Max acceleration | 30,000 mm/s² | 30,000 mm/s² | 20,000 mm/s² |
| Max hot end flow | 32 mm³/s | 32 mm³/s | 32 mm³/s |
| Nozzle | Hardened steel, 0.4 mm standard, max 320°C | Hardened steel, 0.4 mm standard, max 320°C | Stainless steel, 0.4 mm, max 300°C |
| Max bed temperature | 120°C | 120°C | 100°C |
| Touchscreen | 4-inch 800 × 480 | 4-inch 800 × 480 | 3.5-inch 320 × 480 |
| Camera | 1280 × 720 at 30 fps | 1280 × 720 at 30 fps | 2 megapixel chamber camera |
| Wi-Fi | 2.4 GHz / 5 GHz | 2.4 GHz / 5 GHz | 2.4 GHz |
| Power as listed | 1200 W | 700 W | 400 W max input at 100-120 V |
| Slicer | Orca-Flashforge, OrcaSlicer | Orca-Flashforge, OrcaSlicer | Snapmaker Orca, OrcaSlicer |
Snapmaker's page states the U1 swaps "one complete toolhead for another in just 5 seconds". Snapmaker lists PLA, PETG, TPU, PVA and PCTG without the cover, and adds PET, ABS, ASA, PA and PC with the optional Top Cover. Flashforge's other recent launch, the full-color CJ270, is recorded separately: Flashforge CJ270 price and release date.
What we could not confirm
- The date the first Creator 5 or Creator 5 Pro orders shipped to US buyers. The product pages, the Creator 5 Series page, the two blog posts and the press release we read do not state it.
- Launch or reservation prices. Some news coverage describes lower launch prices and a deposit for early reservations; we could not read those articles (they returned an access error, 403) and found no Flashforge page that still states those figures. Flashforge's Early Bird post gives only the $649 US gift card value, not a printer price.
- The dates of the Creator 5 Series Early Bird promotion. Flashforge's winner post does not give them.
- The exact dates of the TCT Asia 2026 show. The press release says only that the show had concluded by March 24, 2026.
- Flashforge's shipping policy page, which robots.txt does not allow us to fetch. We did not record shipping costs or delivery times.
- The firmware base of the Creator 5 series. The product pages do not name it; Flashforge's download page lists firmware 1.9.9-1.3.0 for both models.
- The Pro's size without the filament tube and holders (441 × 411 × 460 mm) is listed as lower in height than the open-frame Creator 5 (436 × 432 × 480 mm). We report both figures as Flashforge lists them.
- Prices at Amazon or other resellers. We recorded only Flashforge's and Snapmaker's own US stores.
Questions
What is the Flashforge Creator 5 Pro release date?
What is the Flashforge Creator 5 price?
Flashforge Creator 5 Pro vs Creator 5: what is the difference?
What nozzle does the Flashforge Creator 5 Pro use?
Flashforge Creator 5 Pro vs Snapmaker U1: how do they compare on paper?
Sources
- Creator 5 Pro price, regular price, stock status, specifications and FAQ - Flashforge US store, Creator 5 Pro (and its product data), read 2026-10-17
- Creator 5 price, regular price, stock status, specifications and FAQ - Flashforge US store, Creator 5 (and its product data), read 2026-10-17
- "$100 OFF" prices for both models - Flashforge US store, Creator 5 Series, read 2026-10-17
- Nozzle sizes and prices - Flashforge US store, Nozzle Assembly for Creator 5 Series, read 2026-10-17
- HEPA filter price - Flashforge US store, HEPA Filter for Creator 5 Pro, read 2026-10-17
- Comparison post with July 2026 prices - Flashforge blog, "Flashforge Creator 5 Pro vs Creator 5: Which to Choose?" (Jul. 5, 2026), read 2026-10-17
- Early Bird winners and gift card values - Flashforge blog, "Creator 5 Series Early Bird Winner List Announced" (Jul. 31, 2026), read 2026-10-17
- Firmware versions - Creator 5 Pro and Creator 5, Flashforge download center, read 2026-10-17
- TCT Asia 2026 debut and seven-second color switch - Flashforge press release, GlobeNewswire, Mar. 24, 2026 (newswire copy on AOL), read 2026-10-17
- Snapmaker U1 price and specifications - Snapmaker US store, Snapmaker U1 3D Printer (and its product data), read 2026-10-17
- Snapmaker U1 Top Cover price - Snapmaker US store, Top Cover for Snapmaker U1, read 2026-10-17
Other printer records: new 3D printers of 2026, with US release dates and prices and Snapmaker U1 US price and release record. How we record prices: about New 3D Printers.
Source links are not affiliate links. Prices change; the figures above are as read on the dates shown.
